Amplified GPS Antenna Splitter | 2 Outputs, 1 Input, TNC Connectors 123-3232-H Wing tip with anti-collision &

Wing tip with anti-collision & forward position lights

This terminal block (EDMO# 27212-2-6) has 6 mounting studs with 10/32-inch 28UNF-2A/8 thread size

5 inch tape cartridge

The PEARLabel(c) 360 with MaxiLabel(c) Pro labeling software is a 360 dpi heat shrink tube

This 877 series chronometer (EDMO# 877A-5V) features 5V lighting with illuminated buttons

Amplified GPS Antenna Splitter | 2 Outputs, 1 Input, TNC Connectors 123-3232-H Wing tip with anti-collision &The ALDCBS1X2 GPS amplified splitter has one input and two outputs and is based on the Wilkinson splitter design. The frequency response covers the entire L band (GNSS) frequencies with excellent gain flatness. In normal configuration, the RF output (J1) passes DC from a connected GPS receiver through the splitter and onto the antenna. This allows the GPS receiver to power both the antenna and the splitters internal amplifier. The other RF output (J2)