CRL Floor Socket with Cap for 2" Tubing Cap Rail Splice Sleeves Connects to a Variety of

Connects to a Variety of Fabricated Corners and End Caps

CRL Cladding Tape and CRL Silicone Sealant with instructions

Interior slip-fit Vertical Corners for 1/2" (12 mm) or 5/8" (16 mm) thick glass allow for hairline joint assemblies with straight lengths of CRL Cap Rail

CRL has engineered a variety of attachment methods

180 Degree Glass to Glass and 90 Degree Glass to Glass Configurations

CRL Floor Socket with Cap for 2" Tubing Cap Rail Splice Sleeves Connects to a Variety ofReady to Install Three Architectural Finishes 304 Stainless Alloy or 260 Brass Alloy Standard CRL Floor Sockets with Caps are used in areas where Partition Posts are only required at certain times. The Floor Socket is inserted into a 3 1 4" (82. 5 mm) diameter, 5" (127 mm) deep hole, and then set in place using Expanding Cement. When Partition Posts are needed, the Cap is removed from the Floor Socket and the Partition Posts are inserted. When