EZCellGene® GL45 Cap Assembly for 250mL Bottle with small bore Overmolded Silicone tubing 1/16" ID x 3/16" OD, 20/CS Connector Type:Plug Customizable double layer membrane configuration

Customizable double layer membrane configuration

and provides the ultimate in top-connection flexibility

enabling users to quickly change the top connections of each bottle to match their application needs

10in (155mm) Volume 4L Bottle Material HDPE Cap Material Polypropylene OD Tubing Ports 4 x 1/8" and 4 x 1/4" Hose Barb 0 Filter Length 6

platinum-cured Membrane Polyethylene (standard version) Springs 316 Stainless Steel Sterilization: Gamma Up to 50 kGy irradiation Temperature One Cycle Up to 130°C for 60 minutes CV Value: Cv~30-57 Cv values represent the approximate expected flow rate in gallons per minute of water at room temperature for a 1 PSI pressure drop

EZCellGene® GL45 Cap Assembly for 250mL Bottle with small bore Overmolded Silicone tubing 1/16" ID x 3/16" OD, 20/CS Connector Type:Plug Customizable double layer membrane configurationEZCellGene GL45 Cap Assembly for 250mL Bottle Ready to Use, Leak Free, Precise Flow Control The EZCellGene GL45 wide mouth media Bottle Assembly from Foxx Life Sciences is a single use, preconfigured solution designed to simplify media and reagent delivery in bioprocessing and cell culture workflows. Each Assembly features VersaCap technology with two integrated 1 16" ID hose barbs one for vent filtration and the other configured for fluid transfer.