Gelcoat -for use in a mold where a vacuum is present ( if not use flowcoat) Choose Pack Size:1L (27002W) saturating them

saturating them

so you can use the push button on the panel to shut off the gas at bottle

A flange protrudes by some 15mm on each edge giving a total of 70mm H x 130mm W and will accept a rail thickness of up to 50mm

80mm  (09212)

1" BSP connection

Gelcoat -for use in a mold where a vacuum is present ( if not use flowcoat) Choose Pack Size:1L (27002W) saturating themNorski Gel Coat is a Non yellowing high build un waxed resin that leaves a tacky surface to enable subsequent lamination. This product is will cure in a mould vacuum so for repairs to damaged gel coat waxed flow coat is normally used. Can be tinted with Norski Pigment Pastes to replace the original colour. Packs include Norski Polyester MEKP Hardener for curing. Colours: White.