SPC Performance GM Rear Toe Cam for 2010 Buick Allure/10+ LaCrosse/11+ Regal Forced Induction>Intercoolers Heat treated steel bearing guide

Heat treated steel bearing guide tube

This 3" diameter Cat-Back(tm) system is intended for vehicles with significant performance upgrades

In the case of the 2022+ Subaru BRZ and Toyota GR86

Pro GUARD7 Media: This filter features 5-layers of progressively Finer Oiled Cotton Gauze and 2-layers of Finer Porosity Synthetic non-woven media for highest filtration efficiency for extreme dust environments

This is the same durable

SPC Performance GM Rear Toe Cam for 2010 Buick Allure/10+ LaCrosse/11+ Regal Forced Induction>Intercoolers Heat treated steel bearing guideReplace the factory torque to yield (TTY) rear camber and toe bolts on GM's Epsilon II platform with these hex chromate free 700 hour salt spray tested cam bolts from SPC. GM's hardware is TTY and needs to be replaced with every alignment. SPC's hardware can be re torqued in future alignments, so you will only need to replace them once. This kit is sold per wheel and gives you the same adjustment range as the factory cam, + 2. 0deg toe change.