2013 Gibson USA 490T Bridge Humbucker | Black Plastic Cover (SGJ), Springs & Screws, 8.01 kΩ ST The factory original Invader was

The factory original Invader was missing so a new one was installed (full length lead) with a CTS 500 kΩ Solid Shaft Pot w/ Switchcraft #11 Output Jack

Comes complete with truss rod wrench

All aspects of the electronics were installed with extreme care and concern and of course function properly without any static or scratching

Traditional adjustment on the back of the screw using standard Phillips-Head and also now adjustable from the front side using a small Slotted or Blade type technicians screw driver

Here's a nice and clean Seymour Duncan Designed SC101 Loaded Pickguard with a fresh and exceptionally clean re-wire

2013 Gibson USA 490T Bridge Humbucker | Black Plastic Cover (SGJ), Springs & Screws, 8.01 kΩ ST The factory original Invader wasHere's a super nice and clean Gibson USA 490R with a black plastic cover complete with springs and screws. The lead has 11" of length and meters at 8. 01 k DCR. Has factory 2 conductor quick connect plug for Gibson PCB which can be clipped off easily and used as a traditional vintage style braided lead.