H320 Bearing Adapter Sleeve with Lock Nut & Washer HTD Timing Belts Performs well in contact with

Performs well in contact with oils and many chemicals

Length : 1 pcs equal to 1 m (3

Bore:1" inch

The MB30 lock washer locks the nut in place to resist loosening from vibration or dynamic loads

or 1311K on cylindrical shafts

H320 Bearing Adapter Sleeve with Lock Nut & Washer HTD Timing Belts Performs well in contact withH320 Bearing Adapter Sleeve with Lock Nut & Washer Parameter Typical Value Description Designation H320 Suitable Shaft Diameter (d) Approximately 100 mm Adapter Sleeve Bore Diameter (d1) Slightly larger than shaft diameter, e. g., ~105 mm Thread Size (Lock Nut) Typically M1052 (verify exact size with supplier) Width of Sleeve (B) Around 6570 mm Lock Nut & Washer Included to secure the sleeve in position Material Hardened steel, often case hardened for